CITY1

Digital control unit for swing gates and sliding gates (230V)

230VAC power supply for 2 single-phase motors without limit switch (700W max).
Display for easy setting of working time and operating logic.
Continuous display of status.
Inputs for photocells and mechanical safety edge.
Plug-in terminal boards.
Quick-connector for plug-in MR1 receiver unit.
Output for 12V electric lock.
Ability to add new functions using optional modules.
Automatic learning of operation times.
Obstacle detection.
Operation by means of mechanical stops connected to the gearcase or connected in series to the motor.
Slow down function at end of cycle.
IP55 case.


CATALOGUE

PD5

230V digital control units for single and double leaf swing gates

230VAC power supply for 2 single-phase motors without limit switch (700W max).
Display for easy setting of working time and operating logics.
Continuous monitoring of the access status through display.
Plug-in terminal boards.
Quick-connector for plug-in MT433 receiver unit.
Quick-connector for plug-in memory modules (PD5 only).
Input enabled to be connected with TTNC digital selector and VRD proximity reader (PD5 only).
Oututput for 12V electric lock.
IP55 case.
Leaf swings slowing down in the limit switch area to prevent noisy closing and door recoils.

CATALOGUE

PD7

Digital control unit for single and double leaf swing gates (230V)

230VAC power supply for 2 single-phase motors without limit switch (700W max).
Display for easy setting of working time and operating logics.
Continuous monitoring of the access status through display.
Quick-connector for plug-in MT433 receiver unit.
Quick-connector for plug-in memory modules.
Input enabled to be connected with TTNC digital selector and VRD proximity reader.
Oututput for 12V electric lock.
IP55 case.

CATALOGUE

PD9

Digital control unit for single and double leaf swing gates (24V)

24 VDC power supply for 2 motors (100W max).
Display for easy setting of working time and operating logics.
Continuous monitoring of the access status through display.
Output for 12V electric lock.
Plug-in terminal boards.
Quick-connector for plug-in MR1 receiver unit.
Leaf swings slowing down in the limit switch area to prevent noisy closing and door recoils.
IP55 case.

The advantages of the low-voltage automation systems with the PD9 are:

Self-secured power against short circuits inside the gearcase, on motors and relevant connected accessories.
Power adjustment by means of current shutting (PWM: Power motor controller).
Obstacle detection by means of monitoring the motor absorbed current.
Operation without the network voltage by means of buffer battery (optional).
Warning light showing the status of the gate.
Programmable logic auxiliary relay for courtesy lights or other use.

CATALOGUE

PRG12PP

Analogue control unit for single and double leaf swing gates (12V)

12 VDC power supply for 2 motors (60W max).
Input for key selector or push-button.
Input for safety photocell.
Oututput for 12V electric lock.
Operation logic programming through dip-switch.
Built-in MT433 receiver unit.
Leaf slowing down in the limit switch area to prevent noisy shutting and rebounds.
Possibility of storing up to 48 different codes, erasing a single code or all the stored ones as well.
IP55 case

PRGU433PP

Control unit with analogue adjustment for swing and sliding gates (230V)

230 VAC power supply for 2 single-phase motors with limit switch (700W max).
Input for key selector or push-button.
Input for safety photocell.
Built-in self-learning receiver (433 MHz).
Operation logic programming through dip-switch.
Motor power and working time, adjustment by means of potentiometers.
Inputs monitored through LED (START, STOP, PHOTOCELL, OPENING and CLOSING LIMIT SWITCH).
The PRGU433PP version allows to store up to 83 different codes.
IP55 Case.

CATALOGUE

 

PD2

Digital control unit for sliding gates (230V)

230 VAC power supply for 1 single-phase motor with limit switch (700W max).
Display for easy setting of working time and operating logics.
Continuous monitoring of the access status through display.
Plug-in terminal boards.
Quick-connector for plug-in MT433 receiver unit.
Oututput for 12V electric lock.
Control for the gate braking at the limit switch.

CATALOGUE

PRGS433PP

Control unit with analogue adjustment for sliding gates (230V)

230 VAC power supply for 1 single-phase motor with limit switches (700W max).
Input for key switch or push-button.
Input for safety photocell.
Built-in self-learning receiver (433 MHz).
Operation logic programming through dip-switch.
Motor power and working time adjustment by means of potentiometers.
Input monitored through LED (START, STOP, PHOTOCELL, OPENING and CLOSING LIMIT SWITCH).
The PRGS433PP version allows to store up to 83 different codes

CATALOGUE

 

PRGH433PLUS

Control unit for rolling gates with automatic closing and flashing lamp / courtesy lights

230 VAC supply power for 1 single-phase motor (1500W max).
Input for key selector or push-button.
Input for safety photocell.
Built-in self-learning receiver (433 MHz).
Operation logic programming through dip-switch.
Working time adjustment by means of potentiometers.
Inputs monitored through LED (START, STOP, PHOTOCELL).
Possibility of storing up to 83 different codes, erasing one single code or all the stored ones as well.
IP55 Case.

CATALOGUE

PRGH433PP

Control unit with analogue adjustment for rolling gates

230 VAC supply power for 1 single-phase motor (1500W max).
Semiautomatic operating logic.
Opening/closing time (from 3 to 120 sec.) adjustment by means of potentiometer.
Input for key-selector or push-button.
Input for safety photocell.
Built-in self-learning receiver (433 MHz).
The PRGH433PP version allows to store up to 83 different codes, erase a single code or all the stored ones as well.
IP55 Case.

CATALOGUE

 

PRGT-PP

Control unit with analogue adjustment for roller shutters

230 VAC supply power for 1 single-phase motor (1500W max).
Input for key-selector or push-button.
Built-in self-learning receiver (433 MHz).
Semiautomatic operating logic.
Working time adjustment by means of potentiometers.
The PRGT-PP version allows to store up to 83 different codes, erase a single code or all the stored ones as well.
IP55 Case.

CATALOGUE